Digiprog III Professional Odometer Programmer V4.94 – Full Set 
Before Order Please Contact our Customer Support Team
Model Name: Digiprog III Eeprom Reader
Compatibility: BMW, Chevrolet, Chrysler, Citroen, Fiat, Ford, GM, Honda, Hyundai, Isuzu, Jaguar, Kia, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rover, Saab, Suzuki, Toyota, Volvo, VW and Yamaha
Material: Plastic and Metal
Languages: English, Spanish, French, Italian, German, Dutch, Portuguese,Turkish
External Testing Certification: No certification
Item Type: Diagnostic Tool - Code Reader
Item Weight: 5,0 kg
Package Size (L x W x H): 42 x 24 x 19
Min. Quantity Order: 1 set
• Newest Version: V4.94
• Worldwide leader in digital speedometer programming and correction software
• ST01/02 and ST04 Adapters provided in the package
Table 1: Compatible Models
Digiprog 3 Menu:
1. EEPROM Menu
The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follow on in the introduction.
2. CAR/TRUCK Menu
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.
4. Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometers or miles.
Using the EEPROM Menu:
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobilizer codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started. The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount Eeproms which will use ST01, but the larger DIL chips will use ST04.
Important Tips for Using Digiprog 3:
1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electrostatic discharge (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when is not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car)
The package include:
1 x Main Unit
1 x OBD2 cable
1 x set of many adaptors & cables
1 x CD Software